TEL:     +370 5 2496198                                     FAX:     +370 5 2496198
  Piping  

 

Pipe fittings  
  Railway accessories  
 

Special offers

 
  PIPE FITTINGS
REPRESENTED COMPANIES  


  Pipe fittings

We supply the following types of pipe fittings: gate valves, knife gate valves, needle valves, globe valves, ball valves, ball segment valves, shut-off valves, check valves, safety valves, control valves, expansion joints, steam traps etc. Diameter range 6 mm to 1600 mm., working pressure – from 0 to 200 MPA. All the shutoff and control valves are available complete with counter flanges, fasteners, pneumatic or electric actuators.

 

Ball valves
Fully-welded, two- and three-PC body, full and reduced port, for gas and liquid applications, temperature range: - 50º С up to + 650º С, working pressure – 0 up to 100 bar, nominal diameter range 6 mm to 1200 mm. Joint type: screw, flanged, welded. Also available are: coated ball valves with extension stem for underground installation; installation services for electric, pneumatic or air-over hydraulic actuators.

Gate valves
For gas and liquid applications, temperature range: - 50º С up to + 650º С, working pressure – 0 up to 500 bar, nominal diameter range 10 mm to 1200 mm. Joint type: screw, flanged, welded. Also available are: coated gate valves with extension stem for underground installation; installation of electric, pneumatic or air-over hydraulic actuators.

 

Knife valves (gate)

Knife valves are used for operative overlapping of flows with larger proportions of solid ingredients; they ensure full opening/closing of a passage. Contour of the inside part of a valve contains no dead-air spaces. Lightweight and highly reliable, valves come with a hand, pneumatic, hydraulic or electric actuator. Valve diameter range 50 to 1200 mm, pressure - up to 100 atm, standard variant nominal pressure - up to 16 atm.

 

Disc Butterfly valves

Butterfly valves with soft sealing, with double and triple eccentric, one- and Bi-directional, metal/graphite sealing. For gas and liquid application,  the temperature range: - 50º С to + 650º С, working pressure – 0 to 100 bar. Nominal diameter range 40 to 1600 mm. Joint type: wager, lug, flanged, welded. Installation of electric, pneumatic or air-over hydraulic actuators.

 

Check valves
Disc check valves, ball check valves, double disk check valves for gas and liquid application, temperature range: - 50º С to + 650º С, working pressure -  0 to 400 bar. Nominal diameter range 6 to 1200 mm. Joint type: screw, flanged, wafer, welded.

Valves

Used as check and control fittings for the following applications: non-aggressive fluids, saturated vapors, oil, air, fossil oil and oil products within the temperature range of 50º С to + 650º С. Nominal diameter range 10 to 400 mm, pressure - up to 400 bar. Joint type: screw, flange, intermediate flange, welded. Installation of electric, pneumatic and air-over hydraulic actuators.

Control valves
Globe valves for gas and liquid application, Ball segment valves, Triple eccentric Butterfly valves, temperature range: - 50º С to + 650º С, working pressure - 0 to 500 bar, nominal diameter range 15 up to 1600 mm. Joint types: flanged, wafer, welded.

 

Safety valves

Necessary for automatic protection from prohibitive increase in the pipeline flow pressure – by way of partial dumping of medium from the system. There are spring, high-lift, lever-type and impulse safety valves. Nominal diameter DN 10mm - 400mm, start pressure Po 0,01 bar - 95 bar. Temperature range T -196C: 450C, nominal pressure PN 16 - 100 bar.

 
Copyright © 2015. JSC EKSORTUS All rights reserved.